[ad_1]
Main features of the new HP micro server
This new HPE ProLiant MicroServer Gen10 Plus micro server is sold with two different processor (CPU) configurations, this aspect is essential to obtain the best possible performance, especially if we will use some type of virtualization. The processors we have available for this new processor are the following:
- Intel Xeon E-2224: This processor is clocked at 3.4GHz Quad-Core with a maximum turbo frequency of 4.6GHz, this CPU does not support hyper threading, so we have four cores and four processing threads. It has 8MB L3 cache memory, is compatible with dual-channel DDR4-2666 RAM and supports up to a maximum of 128GB, although this server only supports a maximum of 32GB DDR4 (2 x 16GB). Other important features of this processor are that it has all Intel virtualization technologies and AES-NI hardware encryption acceleration. This processor has a PassMark of 7,500 points, so it’s a great processor to use for full OS virtualization and also to use Docker or similar technologies.
- Intel Pentium G5420: This processor is Dual-Core at 3.8GHz speed, this CPU supports hyper threading, so we have two cores and four processing threads. It has 4MB L3 cache memory, is compatible with dual-channel DDR4-2400 RAM and supports up to a maximum of 64GB, although this server only supports a maximum of 32GB DDR4 (2 x 16GB). Other important features of this processor are that it has all Intel virtualization technologies and AES-NI hardware encryption acceleration. Finally, this processor integrates an Intel® UHD Graphics 610 GPU. This processor has a PassMark of 3,300 points, so it will be quite limited for the realization of full virtualization of the operating system, but we can use Docker or similar technologies.
As for the RAM memory of this new server, we have 2 slots for DDR4 RAM memories, it supports a maximum capacity of 32 GB in a 2 x 16 GB configuration, the RAM is of ECC type, so we will have error correction, ideal if we use a advanced file system such as ZFS, where ECC memory is critical for the best possible data integrity.
As for internal storage, we have a total of four bays to accommodate hard drives or SSDs with a SATA3 interface, but they cannot be hot-removed.
The Ethernet controller is the Intel i350 AM41Gb and we have a total of them 4 Gigabit Ethernet ports for LAN, this chipset allows us to use link aggregation technologies such as LACP, so we can have a total bandwidth of 4Gbps Full-Duplex. Another very important feature is the incorporation of one PCIe 3.0 x16 port, therefore, we can connect a graphics card to speed up intensive processes such as password cracking, thanks to this port we can also install a 10G network card with double port, to have a speed in the local network up to 20 Gbps Full-Duplex.
Other ports we have available on this server are the incorporation of an internal USB 2.0 Type A port, a total of four rear USB 3.2 Gen 1 (5 Gbps) portsand we also have a total of two USB 3.2 Gen 2 (10 Gbps) ports on the front. This USB port connectivity is ideal for backups and also for extracting data from the server at blazing speed. Finally, this micro server also has a VGA port and a DisplayPort 1.1a on the back.
One of the most notable features of these HP servers is the HP iLO, this allows us to perform a large number of internal configurations without having to boot the operating system. We will be able to install any operating system via the local network, in order to view the server as if we were physically present, and also to shut it down or restart it “from behind” in the event that the main operating system is blocked. In this case we have the HP iLO 5 chipset integrated on the board, but we do not have a specially dedicated network port for this, but we can buy it separately with the “iLO Enablement” kit, therefore, in this new model HP Gen 10 Plus we will have this interesting technology.
Where can I buy the new HPE ProLiant MicroServer Gen 10 Plus
Right now we can buy it in different online stores, such as PCcomponentes or Amazon, you can access the purchase directly from here. The most important thing to know is that both processor models are sold, but the Intel Pentium model comes with 8GB of RAM, while the Xeon comes with 16GB of RAM. You should compare prices to see which model is worth more depending on the use you will make of it.
If you want to know all the advanced features of this micro server, you can insert the file HPE ProLiant MicroServer Gen10 Plus Official Site where you will find all the details.
Source link
