Home / Others / How to blend BitTube Coin (TUBE): Complete the Beginner's Guide

How to blend BitTube Coin (TUBE): Complete the Beginner's Guide

BitTube is a private currency based on Monero. For this reason, BitTube has the privacy aspects of Monero called RingCT.

The goal of BitTube is to create a decentralized video service in which there are never announcements. They want a platform that is always monetized for the publisher and always free publicity for the user, be it a video or a live stream. They are also using IPFS that allows videos not to be hosted in a centralized data center, but all over the world on many different systems. The mining algorithm is Cryptonight Saber which is a heavy Cryptonight modification. They also keep 30% of each block extracted for their airtime service.

How to minify BitTube - Complete Guide

Now that we know the details on Bittube, we get to extract some TUBE!

Some general tips for mining

So, before starting this tutorial, I have two suggestions to make the most of your mining experience. First make sure you have the latest drivers for your GPUs. Secondly, most mining software will be flagged as virus by virus scanners. For this reason, if you perform mining operations on your normal gaming or everyday computer with an antivirus installed, it is advisable to exclude the mining software from the antivirus. What I like to do is create a folder and then insert all my mining software into subfolders. Then I exclude the top-level folder from the antivirus and this excludes all the mining software.

Mineral pools

The first thing we need is a mining pool. You can mine mine, but the payments could take months, depending on how powerful your mining rig is, and the mineral pools usually require a very small fee (1% or less). Using a pool will allow you to receive consistent payments, several times a day. For Bittube, I'm using the official pool on https://mining.bit.tube/ that charge 1% commissions.

They also have a variety of ports to connect to:

Use 11111 if you are mining using a CPU
Use 13333 if you are mining using a GPU (one or two GPUs, such as a gaming computer)
Use 15555 if you are mining using some GPUs
Use 17777 if you are mining using a GPU mining farm (multiple GPUs such as 3 or more per computer)
Use 19999 if you are mining using nicehash (rent mining hashrate)

Now that we have a pool, let's configure the mining software!

Configuration of the extraction software

For the CPU, GPU – Nvidia and GPU – AMD exercises, we will use xmr-stak. It's open source, the most customizable and lets you use the mix of Nvidia GPUs and AMD and CPU, all from a single window. It is also available for Windows and Linux.

You can download xmr-stak from https://github.com/fireice-uk/xmr-stak/releases The latest version is 2.5 but has several configuration files, so we will use 2.4.7. If you need to use Linux, you will need to download the source code and compile the software. This tutorial will not focus on how to create xmr-stak from the source.

The first time you run xmr-stak, you'll have to configure it a little bit. We will cover the initial configuration here, and then you can read how to configure the miner in the section that concerns you (CPU, GPU – Nvidia and GPU – AMD)

When you run xmr-stak for the first time, you will be presented with two windows cmd

You can close what says you had to run to get administrator privileges.

You will then be presented with a series of steps that will guide you through initial software initialization. Once completed, you will not need to do it again.

The initialization steps will ask the following questions:

Type a port on which you want to use remote monitoring. Usually 8000 or 3000 are available on most home computer networks. Next, to monitor your data mining computers, you can enter the IP address and port of your mining computer, in a web browser on any device connected to your network, to view your total speed and other detailed reports.

Currency: – You will need to type "bittube" or "cryptonight_bittube2"
Pool Address – This is the address and port of the pool you want to extract. For example, I typed "mining.bit.tube:7777"
Username: this is your public key for your wallet.
Password: type "x"
SSL support – type "n"
You want to use Nicehash – type "n"
Want to use more pools – type "n"

At this point the software should start the extraction. Wait until "logged into mining_pool: port" is displayed, and then close the mining software. If you look in the folder where the miner is stored, it should have created text files for the CPU and the graphics card (Nvidia or AMD). They would be called cpu.txt, nvidia.txt, amd.txt. It will also create a config.txt file and a pools.txt. In the next sections we will show how to modify txt files for each mining component, as well as how to disable a certain GPU or CPU brand from mining.

Pool configuration

At this point, your pools.txt should be configured, but I'll show you how to configure it manually. Open the pools.txt and you should see something similar

If you want to change server, change the pool address. To edit wallets, edit wallet_address. Leave the empty rig_id. Change the pool password based on the pool configuration.

After all, you have currency. You must tell XMR-Stak which currency is your data mining. They support most of the Cryptonight coins, so you can simply type in the coin name from the list in the txt file. If the currency you want to extract is not in the list, you should know which algorithm uses and use the name of the currency algorithm. If their is a whattomine calculator for your currency, the algorithm is usually listed, otherwise you can probably find information on the coin site.

CPU extraction

As far as CPU mining is concerned, the Cryptonight algorithm is the most profitable algorithm on which to use a CPU. For mining with the CPU, we can use xmr-stak or xmrig. xmr-stak has only precompiled binaries for Windows, while xmrig has them for Windows and Linux. Both have source code, so you can compile them to work with Linux if necessary.

You can download xmr-stak at the address https://github.com/fireice-uk/xmr-stak/releases
You can download xmrig CPU at https://github.com/xmrig/xmrig/releases

For this tutorial we will use xmr-stak.

After completing the initial configuration, we should be ready for mine. One thing to do is try and change the cpu.txt settings that xmr-stak has created for us to get the highest possible hash rate.

I have found that at least for the CPU, the program usually automatically generates the best possible configuration settings. The comments in cpu.txt do an excellent job of explaining each setting and how you can try to get more performance from your machine.

After configuring cpu.txt, you now need to create a boot batch file to run the program.

Just create a new batch file (or a script file if you use Linux) inside the folder where the miner is located and paste it into the batch file

XMR-stak.exe optional_flags

Replace "optional_flags" with nothing if you want the machine to fail using the CPU and any other GPU in the machine, or the following

-NoCPU Disables the CPU from mining.
-NoNVIDIA Disable all Nvidia GPUs in your system from mining.
-NoAMD Disables all AMD GPUs in your system from mining.

For example, my configuration is:

xmr-stak.exe --noNVIDIA

Double-click on the batch file to run the miner and you should see something similar

To view the total speed at any time, press the "h" key on the keyboard when the mining software is in focus.

GPU Mining: Nvidia

As for the mining GPU that uses the Nvidia GPUs, we have the option of using xmr-stak or xmrig. xmr-stak has only precompiled binaries for Windows, while xmrig has them for Windows and Linux. Both have source code, so you can compile them to work with Linux if necessary.

You can download xmr-stak at the address https://github.com/fireice-uk/xmr-stak/releases
You can download xmrig Nvidia at https://github.com/xmrig/xmrig-nvidia/releases

For this tutorial we will use xmr-stak.

After completing the initial configuration, we should be ready for mine. One thing to do is try and change the nvidia.txt settings that xmr-stak has created for us to get the highest possible hash rate.

I've found that for the GPU, you can change the settings to get a little more performance, but typically the program usually automatically generates the best possible configuration settings. The comments in nvidia.txt do a great job of explaining each setting and how you might try to get more performance out of your machine.

Note: this is a heavy cryptonight coin, so the general rule is to use about half a 0.75 of what your normal settings are for normal Crytonight (monero etc.). The picture above is for settings for normal cryptonight, so these should be lowered to my bittube.

After configuring nvidia.txt, we now have to create boot batch files to run the program.

Just create a new batch file (or a script file if you use Linux) inside the folder where the miner is located and paste it into the batch file

XMR-stak.exe optional_flags

Replace "optional_flags" with nothing if you want the machine to fail using the CPU and any other GPU in the machine, or the following

-NoCPU Disables the CPU from mining.
-NoNVIDIA Disable all Nvidia GPUs in your system from mining.
-NoAMD Disables all AMD GPUs in your system from mining.

For example, my configuration is:

xmr-stak.exe --noCPU

Double-click on the batch file to run the miner and you should see something similar

Note that this image was taken by How to Mine Loki (LOKI): Complete Beginner & # 39; s Guide

To view the total speed at any time, press the "h" key on the keyboard when the mining software is in focus.

GPU Mining – AMD

Regarding the GPU extraction using the AMD GPUs, we have the option of using xmr-stak, xmrig, Cast XMR or the AMD Claymore miner Cryptonote.

You can download xmr-stak at the address https://github.com/fireice-uk/xmr-stak/releases
You can download xmrig Nvidia at https://github.com/xmrig/xmrig-nvidia/releases
You can download Cast XMR on https://bitcointalk.org/index.php?topic=2256917.0;tutti
You can download Claymore & # 39; s Cryptonote AMD miner on https://bitcointalk.org/index.php?topic=638915.0

For this tutorial we will use xmr-stak.

After completing the initial configuration, we should be ready for mine. One thing to do is try and change the settings of amd.txt that xmr-stak has created for us to get the highest possible hash rate.

I've found that for the GPU, you can change the settings to get a little more performance, but typically the program usually automatically generates the best possible configuration settings. For my Vega system, I had to add two threads for GPUs. The comments in amd.txt do a great job of explaining each setting and how you might try to get more performance out of your machine.

Note: this is a heavy cryptonight coin, so the general rule is to use about half a 0.75 of what your normal settings are for normal Crytonight (monero etc.). The picture above is for settings for normal cryptonight, so these should be lowered to my bittube

After configuring amd.txt, we now have to create boot batch files to run the program.

Just create a new batch file (or a script file if you use Linux) inside the folder where the miner is located and paste it into the batch file

XMR-stak.exe optional_flags

Replace "optional_flags" with nothing if you want the machine to fail using the CPU and any other GPU in the machine, or the following

-NoCPU Disables the CPU from mining.
-NoNVIDIA Disable all Nvidia GPUs in your system from mining.
-NoAMD Disables all AMD GPUs in your system from mining.

For example, my configuration is:

xmr-stak.exe --noCPU

Double-click on the batch file to run the miner and you should see something similar

Note that this image was taken by How to Mine Loki (LOKI): Complete Beginner & # 39; s Guide

To view the total speed at any time, press the "h" key on the keyboard when the mining software is in focus.

If there are problems, you may not have enough virtual memory. You may need 16 GB of virtual memory (for Vega GPUs you need more than 16 GB per GPU) to change it go to Control Panel -> System and Security -> System and click on Advanced System Settings on the left. From there, click Settings on the Advanced tab. After clicking edit, then on the third screen, deselect the automatic management, choose the custom size and type the size (in MB) for both text boxes. Then press the set button, then the ok button.

Solving general problems

One thing to monitor is stale or rejected shares. If you see a lot of expired shares, you may want to try a server closer to you. If you see a lot of rejected actions, try to reduce the miner's intensity, if available.

How much do I earn TUBE per day?

To figure it out, you would go to https://whattomine.com/coin/256-tube-cryptonightsaber The calculator gives you an approximate estimate, so you may receive a sum higher or lower than the one actually indicated by the calculator.

Most of the values ​​are already entered correctly and you only have to change some values.

Hash rateEnter your total speed (in hashes per second) for all your mining computers. This would be the value of "total speed" in your data mining software. I would like to use the total speed of 15 minutes, as this would be a better average total speed. Be sure to add all the computers you use for Bittube mining.

Power: Enter the total amount of power (in watts) used by your rig. Some mining software will measure it for you. You can also measure the total energy consumption for your computer using special software or a kilowatt meter. I prefer to use a kilowatt meter, because I find it to be the most accurate. Be sure to add all the computers you use for Bittube mining.

Cost: Enter the cost per kilowatt hour you pay to the power company. I was able to find this information on my monthly bill, as well as on their website.

Pool rate: Enter the pool rate + the mining software development fee. For our example, you will enter 1 + 2 = 3

Hardware cost: Enter the total cost of all your hardware.

Using my AMD Vega system for an example, I'll show you how to read the data. In the image above there are really 3 things I'm looking for.

# 1 Look at the Difficulty 24 hours and the Difficulty 7 days. We want them to be all the same, what they are. This tells us that the calculations that we will see in the second image below, will be precise for the days to come, provided the price is not volatile.

# 2 Look at the FORMER. 24 hours volume and the Market Cap. Generally, the bigger these are, the less the price will be volatile. We want the price to be non-volatile, so our calculations will be accurate for the days to come. In this example, market capitalization is average, so that's fine.

# 3 Look at the Create 1 BTC in and the Break even in. It is always interesting to see how long it will take your rig to create 1 BTC. The break even in, will show you a rough estimate of how long it would take to pay for your mining rig, extracting this particular coin. This is great to use before building your mining rig, to see how long it will take before you see the profits.

In this image, we can quickly see how many coins and value in USD we will make in certain periods of time. You want to see the Profit column, as this is the value after paying for your electricity consumption. I usually focus only on the daily payment in USD. By focusing only on this number, you can run the calculator for a few different currencies and quickly see which currency is most profitable for the extraction platform configuration. Keep in mind that you also want to weigh the daily payment with the market capitalization. A low capitalization coin could be really profitable one day, so it could have half the payment tomorrow.

That's all. Now you should extract Bittube! Be sure to type your public key in the mining pool control panel to keep track of your statistics.

Source link